|
pdaparts (September 2, 2008 at 2:49 pm)
We already did the take apart for the iPhone 3G. We had it up on youtube the day the iPhone 3G came out.
owhare (September 2, 2008 at 3:30 am)
let me see you do that with the 3g please and thank you. x]
pdaparts (August 31, 2008 at 2:40 am)
The top of the screen that you touch goes by several names.. Digitizer, Glass Top or Touch Panel. The part under that that you see the image on is an LCD. BUT for the iPhone gen 1 you need a complete assembly. Goto PDAparts(dot)com and take a look at part number IP-2085
pdaparts (August 31, 2008 at 2:38 am)
NO.. You need the complete screen assembly. Goto PDAparts(dot)com and take a look at part number IP-2085
flipx209 (August 31, 2008 at 12:01 am)
what i'm confused about is are there 2 parts or three parts to the screen? is it the digitizer/glasstop and the lcd ? or a glasstop, lcd, and digitizer
flipx209 (August 30, 2008 at 11:54 pm)
i read how you said if the LCD or digitizer is broken you need both, but if you break the glass is it ok to just buy the outerglass replacement?
pdaparts (August 28, 2008 at 3:52 am)
You can use a little hot clue but be careful or just seat the antenna connection back on they most of the time have a snug fit which will be fine.
noypi75 (August 28, 2008 at 3:10 am)
You said the antenna cable is glued? So you need to glue it back to re assemble?
pdaparts (August 27, 2008 at 3:14 pm)
no it will not fit
Garfielder2 (August 27, 2008 at 1:14 pm)
Would iPhone 3G back match to the 2G? |
